Quick Luck & The Practice Kit
Thousands of Clear Choice customers each week ask the best way to heat their Synthetic Urine Kit.
Well, the brains at Clear Choice have solved another problem. Now available, The Synthetic Urine Practice Kit designed, especially for your Pre-mixed Quick Luck Kit.
This amazing product is just used to practice to put your worries to ease!! To test heating your sample and using the heat activator powder and using the heat pad!
The Quick Luck® Synthetic Urine Kit Includes:
- 3oz of premixed premium synthetic urine
- Easy-to-read temperature strip
- 2 Clear Choice heat pads
- Heat activator powder
- Spout cap for realistic pouring
- Easy to follow instructions brochure
The Practice Kit Includes:
- 3oz Mixing container
- Easy-to-read temperature strip
- Clear Choice heat pad
- Heat activator powder
- Spout cap for realistic pouring
- Easy to follow instructions on the box
*Read all information and instructions carefully before proceeding.*
Quick Luck® comes with an easy-to-read temperature strip. Your realistic target temperature range is between 94°F and 100°F.
To avoid a false temperature reading make sure you store the sample with the temperature strip facing away from your body.
Combining heat sources or adding an excessive amount of Heat Activator may overheat the solution.
Once the safety seal is broken, just like real urine the sample will start growing bacteria within a couple of days. If not used, the sample can be refrigerated for up to 72 hours or frozen for up to 6 months.
Heating Options
Synthetic Sample
The bottle holds 3oz of the pre-mixed solution. Do not break the safety seal until the day of use. Once the seal is broken you can opt to change the cap for the spout cap provided which closely resembles the flow of the urine when poured.
Your sample should be heated to an optimal temperature of 94°F and 100°F using a heating pad and topped off with heat activator if required.
OPTION 1: Heat Pad
Remove the paper backing and stick to the bottle. Please allow up to 1 hour to reach the optimal temperature. The heat pad will provide up to 10 hours of heat once activated. Never apply more than 1 heat pad at a time.
OPTION 2: Heat Activator (optional)
The use of heat activator is optional. It comes in handy in last minute situations like when there’s no time to wait for a heating pad to heat up or in a situation where you have applied a heating pad but realize you haven’t reached optimal temperature by the time you are ready to prank.
Keep in mind when using the heat activator that it’s easier to increase the temperature of your sample than to decrease it. Therefore you should add very small amounts of powder at a time, then replace the cap, shake gently, wait 10 seconds and take a temperature reading.
If the sample still isn’t at a good temperature repeat the steps until you reach the optimal range.
The logic here is the cooler your sample the more heat activator will be required. Warmer the sample less heat activator will be required.
Note that you might not see a reading if you are out of the temperature strip’s range. A sample in the optimal range should only feel slightly warm to the touch. If your bottle feels warm but doesn’t show a temperature reading this is usually an indication that you have overheated your bottle.
CAUTION: Never microwave the bottle with its cap on and/or heat pad applied.